Drum TT

Cost efficient: Lab table unit for dosing and testing minimal quantities of powder (manually)

Description

Drum TT allows an easy introduction into lab inspections of powder. The compact filling machine consists of a drum dosing system for minimal quantities (as little as 0.5 mg) and a pneumatic unit to control vacuum and compressed air. Powder formulations can be tested in the galenics and be optimized for series production.

Benefits
  • Ease of use ensures rapid filling process
  • Clean dosing with no powder residue outside the container
  • Easily expandable from batch series to production standard
  • Highly flexible system for powder, food supplements, metallic dust, etc.
  • Fast verification of the dosing capability
  • Cost-effective equipment to test and optimize powder
  • Device for labs and galenics: Drum filler Drum TT

    Drum TT for precise microdosing of powder. Even minimal test quantities as small as 0.5 mg can be tested.

  • Device for labs and galenics: Drum filler Drum TT in the application

    Drum TT is used in the lab during the course of pharmaceutical development. Here, a wide variety of application areas are possible: Inhaler powder, food supplements, metallic dust, spray-dried powder, clean active ingredients, etc..

  • Cost-effective unit for labs and galenics: Drum filler Drum TT

    Cost effective equipment: Drum TT was specifically designed to test and optimize powder formulations in the galenics area.

Technical data
  • Output: approx. 5 - 10 dosages/min.*
  • Weight: approx. 6 kg
  • Compressed air: p = 5 bar
  • Dimensions (LxWxH): 100 x 100 x 135 mm

* Depending on product and operator

Final products
  • Vials
  • Capsules
  • Blisters
  • Stainless steel vials
  • Cartridges

Machine features

Micro-dosing

Various dosing methods allows the dosing of minimal quantities of powder. Depending on the individual powder properties different filling methods such as membrane filling, tamping pin, dosator or drum filling are applicable.

Filling capsules

Various systems for capsule filling allow the dosing of powders, pellets, tablets, micro-tablets, powder blends, active ingredients or liquids. It is even possible to dose capsules into capsules.

Reservoir filling

Some dry powder inhalers include a powder reservoir for a pre-defined number of dosages. Generally, the defined quantity of active ingredients is filled using an auger filler, but it can also be filled in the lab by means of roller dosing.

Filling blisters

The powder filling module can be equipped with a drum filler or with a membrane filler. The drum filler produces partially filled cavities whereas membrane filler is filling the blister cavity to 100%.

What can we do for you?

Do you have questions for us? Get in touch!

Contact us