The Dosator TT is used in the lab during the development or design process of dosing formats for production. Even the smallest powder quantities (of approx. 500 mg or more) are sufficient for initial filling tests. The unit is intended for determining fill quantities by leveling the dosing piston, the powder bed and the position and diameter of the dosing piston.
Easy determination of the optimum dosing method, dosing parameters and dosing formats: The Dosator TT is intended for capsule filling based on the lab standard.
A variety of dosing methods allows the dosing of minimal quantities of powder. Depending on the quality, methods such as diaphragm filling, tamping pin, pipette or drum filling are used.
Various systems for capsule filling allow the dosing of powders, pellets, tablets, micro-tablets, powder blends, active ingredients or liquids. It is even possible to dose capsules into capsules.
Some dry powder inhalers include a powder reservoir for a pre-defined number of dosages. In production, the defined quantity of active ingredients is mostly filled using an auger filler, but it can also be filled in the lab by means of other dosing methods.
The powder filling module of the Pipette TT allows blisters for DPI inhalers to be filled with active ingredient powder.
Do you have questions for us? Get in touch!